Home > In_Line > Industrial Washers > Ultrasonic Stencil Cleaners > Automatic Ultrasonic Stencil Cleaner - Made in the USA

Automatic Ultrasonic Stencil Cleaner - Made in the USA

click image to enlarge
Item #:
SH48KW-30G-ST
Price:
$38,000.00

Filtration System:
Quantity:
  • Description

SharperTek Automatic Ultrasonic Stencil Cleaner

The SharperTek Automatic Ultrasonic Stencil Cleaner is a fully-automated machine designed in the USA by Robotic, Ultrasonic, Mechanical, and Electrical Engineers and built by the highest qualified technicians in Motown, "Detroit, Michigan," and we are proud of it!

The SharperTek Automatic Ultrasonic Stencil Cleaner utilizes precisely controlled ultrasonic sound waves to remove uncured adhesives from stencils and screens. The ultrasonic energy is gentle so as not to damage delicate parts, while at the same time it is highly effective in the removal of even dried printing ink.

The SharperTek Automatic Ultrasonic Stencil Cleaner is a 7 Day programmable, automatic machine.  The unit can be ran in either manual or automatic mode.  The PLC can be programmed for the following:



  1. Programmable filtration cycles.
  2. Programmable pre-heat cycle.
  3. Automatic cleaning cycle.
  4. Programmable agitation mode.
  5. Intraday filtration runs.
  6. End of day shutdown.
  7. End of day filtration run. 
  8. Automatic fluid level verification.
  9. The PLC is programmable for up to 7 day cycles. 

The SharperTek Automatic Ultrasonic Stencil Cleaner has a fully automated cleaning system with the safety of the customer in mind. Once loaded, the stencils are lowered into the cleaning solution where the ultrasonic heated cleaning takes place. Once the cleaning cycle is completed, the stencils are raised, eliminating possible burns that might result from manual removal of the stencils from the heated cleaning solution. The cleaning tank is automatically filtered and reuses the solution.

The SharperTek Automatic Ultrasonic Stencil Cleaner accommodates stencils, screens up to 40 inches (1016mm) long and 10 inches (254mm) in diameter. The transducers are surface mounted running at 40 kHz/5000 watts of ultrasonic power.  Our competition's ultrasonic power does not even come close.  The transducers have a ten year limited warranty against de-bonding. The machine has a two year warranty.

Specification Sheet

Application

Ultrasonic Stencil/Tube Cleaner

Dimensions 90"L x 40"W x 115" H
Weight 850 Lbs.
Finish 4B Brushed Stainless
Construction Stainless Steel W Frame
Plumbing Polypropylene, Brass and Stainless
Electricity 110 VAC 40 amps
220 VAC 20 amps, 1Ø phase
Tank Size 40" Deep, 23" Wide and 12" Long
Tank Liquid Capacity 40 Gallons
Maximum Stencil Size 40" x 10" Tube
Drain Requirement 3/4" NPT
Ultrasonic Power 5000 Watts
Heating Power 5000 Watts
7 Day Wash and Filtration Cycle Flex PLC Programmable and Manual Option
Cleaning Water Filtration System Standard
Power Drain Standard


Custom Industrial Cleaners:
Please fill in the "Quote form" and send request for proper costing. 
Top